Welcome to another Best Floor Coatings LLC blog. Today we will share with you the most common epoxy flooring problems and how to avoid them. Epoxy coating is one of the best flooring options on the market, but you must learn how to take care of it.
Our experts are here to guide you; therefore, we invite you to read this blog to the end. In other words, we have the necessary experience to teach you how to take care of your floor correctly.
Epoxy coating is a delicate material, if it is not installed well then you will face some of the problems that we will mention below. We want to help you solve those problems; therefore, you must pay attention to this blog. We are going to teach you our best tips and tricks.
These Are the Most Common Epoxy Flooring Problems
People often choose this type of floor coating as it offers excellent protection. We know that it is a resistant solution, but if you install it wrong, it will give you problems. Therefore, you need to find a professional to help you install your epoxy floor correctly.
Now we will mention the problems that can suffer your epoxy floor and how you can avoid them. Let’s not waste more time; here are the most common epoxy flooring problems:
- The epoxy floor may start to peel
- Moisture can build up under the coating
- Air bubbles build up underneath epoxy
- The color of your floor may become inconsistent
- Your floor can run out of epoxy
We all know these floors are tough, but you should be prepared to repair yours in case it gets damaged.
The Epoxy Floor May Start to Peel
There are many reasons why epoxy can peel off your floor. The main reason is usually a bad installation or bad preparation of epoxy. This often happens when the epoxy is applied at too high or low temperatures. Make sure your floor is clean and oil-free before using the epoxy.
It is important that you make sure to prepare the concrete floor well. If you don’t clean the concrete surface then the epoxy will separate from the floor and begin to peel. Even if your concrete floor is new, you must etch it with acid. We know that these processes can be complicated, but you must do it if you want to prevent your epoxy floor from starting to come off.
Moisture Can Build up Under the Coating
Our recommendation is to wait at least 24 hours to apply the epoxy. If you don’t do this, the moisture trapped in the concrete will rise, and the bubbles will come out on the coating. It is important to do a moisture test to determine if your floor is suitable for applying the epoxy. We advise you to avoid applying this product on wet floors or you will face problems in the future.
Air Bubbles Buildup Underneath Epoxy
It is recommended to wait for the product to mix so that the epoxy does not harden. Read our other post to learn the main benefits of garage floor epoxy coating. Air bubbles also often appear when epoxy is applied at high temperatures. The heat makes the epoxy dry more upholstered and you cannot finish covering the entire floor.
Air bubbles severely damage the epoxy structure and also affect its appearance. So, you should make sure to follow this guide and install your epoxy floor carefully.
The Color of Your Floor May Become Inconsistent
It is important to know that ultraviolet light can alter the color of the epoxy; therefore, you must be careful when applying the product. If you buy several kits to cover your floor then you may notice a color variation. Measure your floor and be sure to buy a single mix.
Epoxy floors are recognized for offering a wide variety of colors; therefore, it is important that it be applied correctly. We want you to understand that each of these processes are important; in other words, you should follow our advice.
Your Floor Can Run Out of Epoxy
You must be careful when buying the epoxy floor covering kit; in other words, you should buy the correct quantity. Measure your floor well and buy the right kit, or you will run out of the mix to cover the floor. It is also important that you prepare your floor well so that it absorbs the epoxy well.
Some people make the mistake of trying to stretch the epoxy, that’s something you shouldn’t do. If you stretch the epoxy, then the protective layer will be fragile; In other words, your floor will start to get damaged quickly.
Our team created this blog because we wanted to make sure you take good care of your epoxy floor. We hope this information has been helpful; Best Floor Coatings is here to help you with whatever you need.